SONAR X3d Update

소나 업데이트가 나왔네요. 

홈페이지에서는

Support > Support By Product > SONAR > Sonar X3

순서로 찾아가시면 됩니다.

http://www.cakewalk.com/Support/product.aspx/SONAR-X3

X3d 네요. 벌써 세번째 업데이트 군요?

기존버전 안깔고 바로 d 버전으로 업데이트 해도 된다고 합니다.

(아주 예전에는 서버 용량과 트래픽을 줄이기 위해서 b-c-d 순서로 쭉 올라가야 되는 경우가 좀 있었습니다. ㅠ,.ㅠ)

마이크로소프트 미디어 파운데이션 프래임워크로 비디오 앤진을 바꿔서 (기존은 다이렉트 쇼 기반)지원되는 비디오 형식을 많이 늘렸군요. 덕분에 비스타에선 잘 안될 거라고. 어짜피 x3 부터는 윈7~8만 지원하니까요. 

오디오 스냅의 안정성을 높였네요. 

컨트롤 스페이스 눌렀을 때나 온 스탑 나우 기능을 켰을 때 나우 마커가 사라지는 증상 수정. 

제가 경험한 것은 저 둘이라 이번 업데이트가 무척 반갑습니다. ㅎㅎㅎ

자세한 것은 아래 글 또는 위 링크를 참고하세요.

SONAR X3d Update

The information in this article applies to:

    SONAR X3 Producer
    SONAR X3 Studio
    SONAR X3

A new update is available for SONAR X3, SONAR X3 Studio, and SONAR X3 Producer that addresses user reported issues. In order to install this update you must have SONAR X3 already installed. Note that this is a cumulative update. You can install SONAR X3d directly over the SONAR X3 release version (available on discs), the SONAR X3a ESD version (available as a digital download), the SONAR X3b update or the SONAR X3c update.
Fixes and Enhancements
The information below documents a number of fixes and enhancements that are part of SONAR X3d. Because SONAR X3d is cumulative, installing it will bring you up to date with all of the following fixes as well as all of the fixes contained within SONAR X3b and SONAR X3c. The fixes in SONAR X3d include (but are not limited to) the following:

Video Enhancements:

As of SONAR X3d, SONAR’s video engine defaults to using Microsoft’s Media Foundation framework, rather than DirectShow. This fundamentally improves the way video files are loaded, played, edited and exported in SONAR. Media Foundation generally supports most older formats supported by DirectShow as well as many newer formats such as H264 video. A full list of media formats supported by Media Foundation can be found here.

As a result of this change, a large number of long-standing bugs and limitations with importing videos and video playback have been resolved. For backwards compatibility, SONAR's video engine can still be switched to use the DirectShow engine. More information on switching SONAR's video engine can be found here.

NOTE: The Media Foundation engine in SONAR X3D does not support Windows Vista. If you are running Windows Vista your video engine will default to using DirectShow.

Stability Fixes:

    Resolved an issue with Antares AVOX VST 3 plug-ins crashing SONAR (CWBRN-20936)
    Resolved a crash when using two instances of Catanya sending VSTi MIDI Out to SONAR (CWBRN-22141)
    The iZotope Radius.dll shipped with SONAR has been updated, resolving several stability issues with AudioSnap when bouncing down clips using the offline Radius rendering algorithms
    Resolved an issue where closing a project with a VST3 plug-in in the ProChannel FX Chain's FX Bin could result in a crash

Usability:

    Resolved an issue where the Now Time Marker would not stay at it's original position when "On Stop Rewind to Now Marker" was enabled
    Resolved an issue where fractional scrolling would prevent snapping to the top of the track when using the up and down cursor keys to scroll tracks and buses
    Resolved an issue where the Rex Shared Library.dll was missing in 32-bit versions of SONAR X3 Studio, causing features dependent on it to not work properly
    Resolved an issue where clicking a loop in the Browser would remove the loop from the Browser as well as move it from it's current location on the hard drive to the Project Audio Folder
    Resolved an issue where inserting a mono plug-in first in an FX Chain would not update the interleave button to mono
    Resolved an issue where the order of Take Lanes would behave abnormally when switching Screensets
    Resolved an issue where Delete Hole would fail if clips were selected via clip selection versus timeline selection

    Resolved an issue where pressing CTRL while slip editing would capture the mouse
    Resolved an issue where saved projects would not upload to Gobbler if a drive was unwatched
    Resolved an issue where keybindings for snap to triplet note durations would fail
    Resolved an issue in the Console View and Inspector where dragging and dropping plug-ins would drop them into the wrong order
    Improved VST3 Plug-in Preset Support

Audio & MIDI:

    Resolved an issue where moving clips on a Simple Instrument Track would reassign the tracks MIDI input from a VSTi MIDI Output ports to all hardware MIDI ports
    Resolved an issue where VSTi's would not output audio when Undoing a recording and Rewinding to Zero if Fade in and Fade Out were configured to a value greater then zero.
    Resolved a rare issue where expanding and collapsing track folders could prevent a project from playing back
    Resolved an issue where Record Arm was slow to respond when Tracks were in Folders and Dynamic Arm was enabled
    Resolved a "Out of Memory" error given when importing MP3 files with IDE3 v2.4 tags
    The Now Time now syncs properly between the Track View and the Loop Construction View (CWBRN-21458)
    Resolved an issue with playback in the Loop Construction View not starting at the same position as the Now Time (CWBRN-21504)

Plug-ins:

    Resolve an issue where the Console Emulator would buzz when inserted on Mono tracks with the 64-bit double precision engine enabled (CWBRN-21129, CWBRN-21546, CWBRN-21104)
    Resolved an issue where the QuadCurve EQ Flyout FFT would stop analyzing with the 64-bit double precision engine enabled
    Resolved an issue where the QuadCurve EQ would stop processing audio if the Global ProChannel On/Off button was used to disable it, the track was frozen, and then the EQ was turned back on

UI:

    Opening Offline Help from the various Import and Export dialogs no longer opens Help behind SONAR (CWBRN-4199)
    Resolved an issue where some ProChannel graphics would not draw properly when controls were manipulated in 32-bit versions of SONAR
    Resolved an issue where resizing the MultiDock or bus pane height would also change track height for tracks that were previously zoomed into via the ALT + mouse wheel gesture.
    Resolved an issue where track heights would not open to default heights correctly in certain templates
    Resolved an issue where the Now Time in the Track View and Piano Roll View would become out of sync when using the MultiDock
    The Smart Tool no longer draws Fade handles on MIDI clips when hovering over MIDI clips
    Resolved an issue where some parameters would not display that they were in Offset Mode properly when set to their default positions
    Segmented meters for MIDI tracks now display green clip indicator instead of red for a clip indicator
    Text no longer cut off in the Track Control dropdown in European localized versions of SONAR
    Resolved an issue where PRV lines semi-disappear when hovering over with tools (CWBRN-18629)
    Resolved an issue where track name text color would not change until brightness, hue or saturation were adjusted
    Resolved an issue where crossfades could potentially display erroneous waveform data
    Mouse down on Preferences menu no longer changes font weight
    Resolved an issue where Composite Clips of mixed mono and stereo clips would draw mono clips abnormally
    Key bindings listed in the Navigator context-menu are now displayed properly
    Text label for Quick Start in German translation no longer crowded
    Reset VST Settings dialog translated for ES/DE/IT languages
    Text in VST Scan toast notifications is no longer cropped in European and Japanese localized installations of SONAR
    Resolved an issue where the Now Time would become stuck after the monitor refreshed (such as from waking from sleep or when altering screen resolutions while SONAR was minimized)
    Resolved an issue where the Color Preferences menu would display overlapped controls on Japanese installations of SONAR
    Resolved an issue with the QuadCurve EQ flyout spectrum analyzer that caused the analyzer to fill the plot, then decay away, whenever the zoom window was opened
    Opening a Flyout panel for the QuadCurve EQ will now close any other Flyout panels (even if they are pinned) so you can see the EQ properly
    Resolved an issue where the Zoom Tool would not clear selection after zooming
    The Track View's View and Tracks menus now display missing shortcuts for the various menu options
    The Surround Panner widget is now displayed properly for Simple Instrument Tracks
    Synth Browser Name is no longer automatically highlighted after inserting a new synth into the Synth Rack
    The Clip Effects Bin is now right-aligned when dragging and dropping effects onto clips
    The widget for the Track Control Manager now resizes dynamically
    Drag Reorder and Drag Copying plug-ins now displays the correct cursor
    AudioSnap Transient Marker context menu now displays missing shortcuts
    Numerous other minor UI adjustments for an overall cleaner interface


Installation Instructions
Installation is as easy as downloading the appropriate update from the links below for your version of SONAR and running the installer. The on screen instructions will guide you through the rest. This update is cumulative. You can install SONAR X3d directly over the SONAR X3 release version (available on discs), the SONAR X3a ESD version (available as a digital download), the SONAR X3b update or the SONAR X3c update.

If you experience any issues downloading or installing the update, we recommend temporarily disabling any anti-virus software or background services that might be running, such as Windows Update, as they may interfere with the installation process.

To install this update you must be a registered SONAR X3 owner. Additionally, you can access a link to the proper update for your version by going to Help > Check for Program Updates.

Please note that "N" versions of Windows 7 and 8 require additional installation steps. More information here.


Additional Installation Steps Regarding Documentation:

Both the offline and the online version of SONAR X3's documentation has been updated to include new topics pertaining to SONAR X3d as well as numerous corrections from user feedback.

We recommend clearing your browser's cache if any new topics are not displaying for you. You can also press F5 to refresh the current page you are on. The offline .chm version has been updated as well. No action is necessary for those changes. If you prefer the offline .chm version, you can set F1 to open it by default by going to Edit > Preferences > File - Advanced and selecting "Always Use Offline Help".